Cisco Catalyst 2960X-48FPD-L switch - 48 ports - Managed - desktop, rack-mountable

Device Type Switch - 48 ports - Managed - stackable

Enclosure Type Desktop, rack-mountable 1U

Subtype Gigabit Ethernet

Ports 48 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+

Power Over Ethernet (PoE) PoE+

PoE Budget 740 W

Performance Switching capacity: 216 Gbps

Forwarding performance (64-byte packet size): 130.9 Mpps

Capacity Virtual interfaces (VLANs): 1023

Jumbo Frame Support 9216 bytes

Max Units In A Stack 8

Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI

Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+

Features Layer 2 switching, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion Detection System (IDS), IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, RADIUS support, SSH support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (CoS), Cisco FlexStack Plus

Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX

Processor : 600 MHz

RAM 512 MB

Flash Memory 128 MB

Status Indicators Port status, link activity, port transmission speed, port duplex mode, system, RPS (Redundant Power Supply), PoE

Width 44.5 cm

Depth 36.8 cm

Height 4.5 cm

Weight 5.8 kg

MTBF 233,370 hours

Compliant Standards CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2011/65/EU, VCCI Class A, KN24, KN22 Class A, EN 300386

Power Device Internal power supply

Power Redundancy Optional

Voltage Required AC 120/230 V (50/60 Hz)

Features Redundant Power System (RPS) connector

Min Operating Temperature -5 °C

Max Operating Temperature 45 °C

Humidity Range Operating 10 - 95% (non-condensing)

Min Storage Temperature -25 °C

Max Storage Temperature 70 °C

Humidity Range Storage 10 - 95% (non-condensing)

Interfaces 48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 - 24 ports (PoE+) / 48 ports (PoE) - 30 W

1 x console console - RJ-45 - RJ-45

1 x mini-USB console - mini-USB Type B - Type B - management

2 x USB - Type A

1 x 1000Base-TX 10Base-T/100Base-TX - RJ-45 - RJ-45 - management

2 x SFP+ - SFP+ - uplink

Expansion Slots 1 (total) / 1 (free) x Stacking Module

Service & Support Limited warranty - advance parts replacement - lifetime - response time: next business day

Technical support - consulting - 90 days

Software Included Cisco IOS LAN Base