Cisco Catalyst 2960X-48LPD-L switch - 48 ports - managed - desktop, rack-mountable

Device Type Switch - 48 ports - Managed - stackable

Enclosure Type Desktop, rack-mountable 1U

Subtype Gigabit Ethernet

Ports 48 x 10/100/1000 (PoE+) + 2 x SFP+

Power Over Ethernet (PoE) PoE+

PoE Budget 370 W

Performance Switching capacity: 216 Gbps

Forwarding performance (64-byte packet size): 130.9 Mpps

Capacity Active VLANs: 1023

Jumbo Frame Support 9216 bytes

Max Units In A Stack 8

Remote Management Protocol SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, CLI

Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+

Features Full duplex capability, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Management Information Base (MIB), Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of Service (CoS), Cisco FlexStack Plus, DiffServ Code Point (DSCP) support

Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX

Processor : 600 MHz

RAM 512 MB

Flash Memory 128 MB

Status Indicators Link activity, port transmission speed, port duplex mode, system, status, RPS (Redundant Power Supply), PoE

Width 44.5 cm

Depth 36.8 cm

Height 4.5 cm

Weight 5.8 kg

MTBF   277,960 hours

Compliant Standards CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, EN 300386, RoHS 2011/65/EU

Power Device Internal power supply

Power Redundancy Optional

Voltage Required AC 120/230 V (50/60 Hz)

Power Consumption Operational 45.7 Watt

Features Redundant Power System (RPS) connector

Min Operating Temperature -5 °C

Max Operating Temperature 45 °C

Humidity Range Operating 10 - 95% (non-condensing)

Min Storage Temperature -25 °C

Max Storage Temperature 70 °C

Humidity Range Storage 10 - 95% (non-condensing)

Interfaces 48 x 1000Base-T - RJ-45 - 12 ports (PoE+) / 24 ports (PoE)

1 x console - RJ-45

1 x mini-USB - Type B - management

1 x USB - Type A

1 x 100Base-TX - RJ-45 - management

2 x - SFP+ - uplink

Expansion Slots 1 (total) / 1 (free) x Stacking Module

Service & Support Limited warranty - advance parts replacement - lifetime - response time: next business day

Technical support - consulting - 90 days

Software Included Cisco IOS LAN Base