Cisco (WS-C3560X-48T-S) Catalyst 3560X Network Switch

Device Type Switch - 48 ports - managed

Enclosure Type Rack-mountable 1U

Subtype Gigabit Ethernet

Ports 48 x 10/100/1000

Performance Switching fabric bandwidth: 160 Gbps

Capacity Virtual interfaces (VLANs): 1005

Jumbo Frame Support 9216 bytes

Routing Protocol RIP-1, RIP-2, HSRP, static IP routing, RIPng

Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI

Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+

Features Hot swap module replacement, layer 2 switching, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN)

Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae

RAM 256 MB

Flash Memory 128 MB

Status Indicators Port status, port transmission speed, port duplex mode, power, system, link/activity

Expansion / Connectivity

Interfaces 48 x 10Base-T/100Base-TX/1000Base-T - RJ-45 ¦ 1 x USB Type A ¦ 1 x console - mini-USB Type B management ¦ 1 x RS-232 - RJ-45 management ¦ 1 x 10Base-T/100Base-TX - RJ-45 management

Expansion Slots 1 (total) / 1 (free) x expansion slot

Power Device Internal power supply

Installed Qty 1 (installed) / 2 (max)

Power Redundancy Optional

Power Redundancy Scheme 1+1 (with optional power supply)

Voltage Required AC 120/230 V (50/60 Hz)

Features Redundant Power System (RPS) connector

Rack Mounting Kit Optional

MTBF 186,778 hours

Compliant Standards TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1

Software / System Requirements

Software Included Cisco IOS IP Base

Width 17.5 in

Depth 18.1 in

Height 1.8 in

Weight 16.09 lbs

Min Operating Temperature 23 °F

Humidity Range Operating 5 - 95% (non-condensing)

Min Storage Temperature -40 °F

Max Storage Temperature 158 °F