Cisco (WS-C2960X-24TS-L) Catalyst 2960X Network Switch

Device Type Switch - 24 ports - managed - stackable

Enclosure Type Desktop, rack-mountable 1U

Subtype Gigabit Ethernet

Ports 24 x 10/100/1000 + 4 x Gigabit SFP

Performance Switching capacity: 216 Gbps ¦ Forwarding performance (64-byte packet size): 71.4 Mpps

Capacity Virtual interfaces (VLANs): 1023

Jumbo Frame Support 9216 bytes

Max Units In A Stack 8

Remote Management Protocol SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI

Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+

Features Layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, RADIUS support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet

Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1ae, IEEE 802.3az, IEEE 802.1AX

Processor APM86392: 600 MHz

RAM 512 MB

Flash Memory 128 MB

Status Indicators Port transmission speed, port duplex mode, system, status, link/activity

Expansion / Connectivity

Interfaces 24 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 ¦ 1 x console console - RJ-45 - RJ-45 ¦ 1 x mini-USB console - mini-USB Type B - Type B management ¦ 1 x USB Type A ¦ 1 x 1000Base-TX 10Base-T/100Base-TX - RJ-45 - RJ-45 management ¦ 4 x SFP (mini-GBIC) - SFP uplink

Expansion Slots 1 (total) / 1 (free) x Stacking Module slot

Power Device Internal power supply

Power Redundancy Optional

Voltage Required AC 120/230 V (50/60 Hz)

Features Redundant Power System (RPS) connector

MTBF 564,910 hours

Compliant Standards CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2011/65/EU, VCCI Class A, KN24, CNS 13438(95) Class A, KN22 Class A, EN 300386, AS/NZS CISPR22:2004 Class A

Software / System Requirements

Software Included Cisco IOS LAN Base

Width 17.5 in

Depth 11 in

Height 1.8 in

Weight 8.82 lbs

Min Operating Temperature 23 °F

Max Operating Temperature 113 °F

Humidity Range Operating 10 - 95% (non-condensing)

Min Storage Temperature -13 °F

Max Storage Temperature 158 °F

Humidity Range Storage 10 - 95% (non-condensing)